---
title: Laser Cutting vs Plasma Cutting: Which Is Better?
url: https://sigmalasertech.com/guides/laser-cutting-vs-plasma-cutting/
description: Laser vs plasma cutting compared on accuracy, edge quality, thickness, speed and cost per part, with a simple rule for which to choose for sheet and plate jobs.
updated: 2026-11-19
---

[Home](https://sigmalasertech.com/) / [Guides](https://sigmalasertech.com/guides/) / Laser vs plasma cutting

# Laser cutting *vs plasma.*

Both cut steel with heat, but they suit very different jobs. Here is how to choose, from a shop that will tell you when plasma is the better buy.

[Get a Quote →](https://sigmalasertech.com/quote/) [WhatsApp engineering](https://wa.me/919099362799?text=Hi%20Sigma%20Laser%20Tech%2C%20I%20need%20a%20quote.)

By [Hemendra Patel](https://sigmalasertech.com/about/#leadership), Director, Sigma Laser Tech · Updated 2026-11-19

**Choose laser cutting** for sheet and plate up to about 20 mm when you need accurate parts, small holes and clean edges ready for bending or welding. **Choose plasma cutting** for thick plate (above 20–25 mm) or rough structural parts where ±1 mm is acceptable and price per metre matters most.

|  | Laser cutting | Plasma cutting |
|---|---|---|
| Accuracy | ±0.05 mm positioning, ±0.1–0.2 mm parts | ±0.5–1 mm typical |
| Kerf | 0.15–0.6 mm | 1.5–4 mm |
| Edge | Square, smooth, little dross | Bevelled, more dross, often needs grinding |
| Smallest hole | ≈ sheet thickness | ≈ 1.5 × thickness |
| Thin sheet (<3 mm) | Excellent, no warping | Heat distortion likely |
| Thick plate (>25 mm) | Not on a 3 kW CO₂ laser | Good and economical |
| Heat-affected zone | Narrow | Wider |
| Best for | Precision parts, enclosures, brackets, jali | Structural plate, heavy fabrication |

## The hidden cost: finishing

A plasma-cut bracket is cheap off the table but often needs dross grinding and hole reaming before it fits. A laser-cut part goes straight to the [press brake](https://sigmalasertech.com/cnc-bending-ahmedabad/) or [welding](https://sigmalasertech.com/welding-fabrication-ahmedabad/). Compare cost per finished part, not cost per metre.

## What about fiber lasers?

Fiber lasers cut thin sheet faster than CO₂ and reach greater thickness at high power; see [fiber vs CO₂ laser cutting](https://sigmalasertech.com/guides/fiber-vs-co2-laser-cutting/).

FAQ

## Questions buyers ask us.

###

### Is laser cutting better than plasma cutting?

For sheet and plate up to about 20 mm where accuracy and edge finish matter, laser is better: tighter tolerance, smaller holes, narrower kerf and almost no dross. For thick plate above 20 to 25 mm where tolerance is loose, plasma is usually cheaper and faster.

###

### Is laser cutting more expensive than plasma?

Per metre on thick plate, often yes. Per finished part on thin sheet, often no, because laser parts need little or no grinding and can go straight to bending and welding.
