---
title: Heavy Fabrication & Plate Rolling in Ahmedabad | Sigma
url: https://sigmalasertech.com/heavy-fabrication-ahmedabad/
description: Heavy fabrication in Ahmedabad: plate rolling up to 20 mm × 2500 mm, structures, tanks, machine bases and plant equipment, with a 5-tonne EOT crane. Send drawings.
updated: 2026-11-19
---

[Home](https://sigmalasertech.com/) / Heavy Fabrication in Ahmedabad

# Heavy fabrication *& plate rolling.*

Plate rolling up to 20 mm, welded structures, machine bases, tank shells and plant equipment, lifted with our own 5-tonne crane and built from laser cut plate.

[Get a Quote →](https://sigmalasertech.com/quote/) [WhatsApp engineering](https://wa.me/919099362799?text=Hi%20Sigma%20Laser%20Tech%2C%20I%20need%20heavy%20fabrication.)

**Sigma Laser Tech** does heavy fabrication in Ahmedabad: plate rolling up to 20 mm thick and 2500 mm wide, welded structures and machine bases, tank shells and plant equipment. Parts are laser cut from MS plate up to 20 mm and handled with a 5-tonne EOT crane at its Bhavda factory.

## What we build

- Rolled shells for [storage tanks](https://sigmalasertech.com/products/storage-tanks/), silos, ducts and chimneys
- Reactor and chamber bodies for [tyre pyrolysis plants](https://sigmalasertech.com/products/tyre-pyrolysis-plant/)
- Machine bases, skids and structural frames
- Steel structures for [multi-level car parking](https://sigmalasertech.com/products/automated-car-parking-system/)
- Flanges, base plates, gussets and stiffeners from thick plate

## From plate to assembly

We laser cut thick MS plate (up to 20 mm) for flanges, base plates and gussets, roll it, fit it on cast iron bed plates and weld with 400 A MIG and TIG sets. Holes are drilled on the radial drill after welding where positional accuracy matters.

![3-roll plate rolling machine for heavy fabrication](https://sigmalasertech.com/assets/rolling-bending.jpg)

3-roll pre-pinch plate rolling machine

| Plate rolling | Up to 20 mm thick, 2500 mm wide |
|---|---|
| Laser cut plate | MS up to 20 mm, 3000 × 1500 mm |
| Crane | 5-tonne single girder EOT |
| Welding | 400 A MIG and TIG, spot welding |
| Drilling | Apex radial drill, up to 31.75 mm in MS |
| Sawing | 7" band saw, 178 mm capacity |
| Turning | Ajay lathe, 1372 mm between centres |

FAQ

## Questions buyers ask us.

###

### What is your plate rolling capacity?

Our 3-roll pre-pinch plate rolling machine rolls MS, SS and aluminium plate up to **20 mm thick** and **2500 mm wide** into cylinders, cones (in segments) and curved sections.

###

### How heavy a fabrication can you handle?

The shop has a 5-tonne single girder EOT crane, so assemblies up to about 5 tonnes can be lifted and turned during welding. Larger structures can be built in sections and assembled on site.

###

### Do you make tank shells and pressure parts?

We roll and weld tank shells, hoppers, ducts and reactor bodies for storage tanks and pyrolysis plants. For code-stamped pressure vessels, share the design code with your enquiry so we can confirm what documentation is possible.

###

### Can you drill and machine heavy parts?

Yes, for finishing operations: an Apex radial drill (up to 31.75 mm in MS), a pillar drill, a 7-inch band saw and a 4.5-foot lathe handle holes, cut-offs and simple turning.
