---
title: Aluminium Laser Cutting in Ahmedabad | Sheet up to 8 mm
url: https://sigmalasertech.com/materials/aluminium-laser-cutting/
description: Aluminium sheet laser cutting in Ahmedabad up to 8 mm: 5052, 6061 and 1100 for enclosures, panels and signage. Burr-free nitrogen cut from ₹177/m. Upload your DXF.
updated: 2026-11-19
---

[Home](https://sigmalasertech.com/) / [Materials](https://sigmalasertech.com/materials/) / Aluminium laser cutting

# Aluminium laser cutting *up to 8 mm.*

Light, corrosion-resistant parts in 5052, 6061 and 1100 aluminium, cut with nitrogen for clean edges that are ready to bend, anodise or powder coat.

[Get a Quote →](https://sigmalasertech.com/quote/) [WhatsApp engineering](https://wa.me/919099362799?text=Hi%20Sigma%20Laser%20Tech%2C%20I%20need%20aluminium%20laser%20cutting.)

**Aluminium laser cutting in Ahmedabad** at Sigma Laser Tech covers sheet and plate up to 8 mm in alloys such as 5052, 6061 and 1100. It is cut with nitrogen for a clean edge and costs from about ₹177 per metre plus material, with bending and powder coating available.

## Good uses for aluminium

- Electronic and electrical enclosures, heat-sink plates
- Signboards, letters, façade and ceiling panels
- Lightweight covers for machines and vehicles
- Jigs, templates and fixtures

## Design tips

- Keep hole diameters at least equal to the sheet thickness.
- Use 5052 when the part will be bent; use an inside radius of at least 1–1.5 × thickness.
- Ask for protective film on cosmetic faces.

| Thickness | 0.8 – 8 mm |
|---|---|
| Alloys | 1100, 3003, 5052, 6061, 6063 |
| Assist gas | Nitrogen |
| Sheet size | Up to 3000 × 1500 mm |
| Rate | from ₹177/m + material |
| Finishing | Bending, powder coating, anodising via partner |

FAQ

## Questions buyers ask us.

###

### How thick aluminium can you laser cut?

Up to **8 mm** aluminium sheet and plate. Aluminium reflects laser light and conducts heat away quickly, so it cuts slower than steel of the same thickness.

###

### Which aluminium alloy is best for laser cutting and bending?

5052 cuts cleanly and bends well, so it is the usual choice for enclosures and brackets. 6061-T6 is stronger but can crack on tight bends, so give it a larger bend radius. 1100 is soft and suited to signage and trims.

###

### What does aluminium laser cutting cost?

From about ₹177 per metre of cut plus material at about ₹330 per kg, before GST. Aluminium weighs about a third of steel, so material cost per part is often lower than it looks.
