Home / Guides / DXF files for laser cutting

Preparing a DXF for laser cutting.

A clean file gets a faster quote and a correct part. This is the checklist our programmers use before every job.

Get a Quote → WhatsApp engineering

To prepare a DXF for laser cutting: draw the flat part at 1:1 scale in millimetres, use only closed contours, delete duplicate and overlapping lines, explode text and splines, put bend lines on their own layer, and remove dimensions and title blocks from the cut layer. Then state material, thickness and quantity.

The 10-point checklist

  1. Scale 1:1, units in mm. A part drawn in inches or at 1:10 is the most common error.
  2. Closed contours only. Every outline and hole must be a closed loop with no gaps.
  3. No duplicate lines. Overlapping lines make the laser cut twice and burn the edge. Use OVERKILL in AutoCAD.
  4. Explode text to outlines, and use a stencil font so letters like O and A keep their centres.
  5. Convert splines to arcs and polylines if possible.
  6. Separate layers: CUT, BEND, ETCH/MARK, and NOTES.
  7. Remove title blocks and dimensions from the cut layer, or send them as a separate PDF.
  8. Respect minimum sizes: holes at least the sheet thickness, bridges at least the thickness. See the thickness chart.
  9. One part per file, or clearly label each part and quantity.
  10. Write material, grade, thickness, quantity and finish in the file name or message.
FormatAcceptedNotes
DXF / DWGYesPreferred for flat parts
STEP / STP / IGESYesWe unfold sheet metal
SolidWorks, InventorYesSLDPRT, SLDASM, IPT, IAM
STLYesFor reference geometry
PDFYesVector PDF converts directly
AI / SVGYesFor jali and signage art
Photo / sketchYesNeeds dimensions; we redraw
FAQ

Questions buyers ask us.

Which file format is best for laser cutting?

DXF is the standard for laser cutting because it is a 2D vector format that every CAM system reads. DWG works equally well. 3D formats like STEP are fine too; we unfold them into flat patterns.

Can I send a PDF or a hand sketch instead of a DXF?

Yes. A vector PDF often converts directly. A scanned sketch or photo with clear dimensions is redrawn by our team; that takes a little longer and may be charged for complex parts.

Should I draw the part with kerf compensation?

No. Draw the part at its finished size. The cutting software offsets the laser path by half the kerf automatically.

How do I show bend lines in a DXF?

Put bend lines on a separate layer (for example BEND) and note the direction and angle, or send the 3D model so we can unfold it with our own bending data.

Send the drawing. Get the price.

DXF, DWG, STEP or a PDF sketch. An engineer checks it and replies on WhatsApp or email during working hours.