CNC bending in Ahmedabad.
Programmed press brake bending for brackets, channels, trays, covers and enclosures. Bend lengths up to 3100 mm, repeatable angles across the whole batch, done next to the laser that cut your blanks.
Sigma Laser Tech offers CNC sheet metal bending in Ahmedabad on a Yawei PBA-110/3100 press brake: 1100 kN force, 3100 mm bending length. It bends MS, stainless steel and aluminium parts from single prototypes to production batches, usually together with laser cutting, welding and powder coating.
What we bend
- L and Z brackets, angles and gussets
- C and U channels, box sections and cable trays
- Electrical panel doors, enclosures and mounting plates
- Machine guards, covers and hoppers
- Architectural trims, flashings and facade panels
Why bend where you cut
Bend allowance depends on material, thickness, die and the actual press brake. When we cut the flat blank, we calculate the flat length from our own bending data, so the finished flange lands where your drawing says. Sending blanks between two vendors is the most common reason for flanges that are 1 to 2 mm off.
Design tips for bent parts
- Keep holes at least 2.5 × thickness plus the bend radius away from a bend line, or they stretch.
- Add bend reliefs where a bend meets an edge.
- Minimum flange length is about 4 × thickness for a clean bend.
- Show the inside radius and which side the dimension is to.

| Machine | Yawei PBA-110/3100 CNC press brake |
| Bending force | 1100 kN (≈110 tonnes) |
| Bending length | 3100 mm |
| Between uprights | 2600 mm |
| Throat depth | 410 mm |
| Ram stroke | 215 mm |
| Materials | MS, CRCA, HR, SS 304/316, aluminium, GI |
| Rate | from ₹21 per bend |
Questions buyers ask us.
What is the maximum bending length and tonnage?
Our Yawei PBA-110/3100 CNC press brake bends up to 3100 mm long with 1100 kN (about 110 tonnes) of force. The distance between uprights is 2600 mm and the throat depth is 410 mm, which limits how deep a flange can be when the part is wider than the uprights.
How thick a sheet can you bend?
It depends on bend length and material. As a guide, MS up to about 6 mm bends over most of the machine length, and thicker plate over shorter lengths. Stainless steel needs roughly 1.5× the force of MS. Send the drawing and we check tonnage before quoting.
What is the minimum inside bend radius?
For MS the inside radius is usually close to the sheet thickness. Stainless and aluminium (especially 6061) need a larger radius to avoid cracking. We size the V-die for your material and tell you the achievable radius in the quote.
Do you bend parts that you did not laser cut?
Yes, we take bending-only job work on customer-supplied blanks, but laser cutting and bending together gives better accuracy because bend reliefs and flat lengths are calculated by the same team.
How much does CNC bending cost?
Bending is charged from about ₹21 per bend per piece, plus setup. Long, heavy or very tight-tolerance bends are priced after review. See the full price list.
Send the drawing. Get the price.
DXF, DWG, STEP or a PDF sketch. An engineer checks it and replies on WhatsApp or email during working hours.