Home / Guides / Laser vs plasma cutting

Laser cutting vs plasma.

Both cut steel with heat, but they suit very different jobs. Here is how to choose, from a shop that will tell you when plasma is the better buy.

Get a Quote → WhatsApp engineering

Choose laser cutting for sheet and plate up to about 20 mm when you need accurate parts, small holes and clean edges ready for bending or welding. Choose plasma cutting for thick plate (above 20–25 mm) or rough structural parts where ±1 mm is acceptable and price per metre matters most.

Laser cuttingPlasma cutting
Accuracy±0.05 mm positioning, ±0.1–0.2 mm parts±0.5–1 mm typical
Kerf0.15–0.6 mm1.5–4 mm
EdgeSquare, smooth, little drossBevelled, more dross, often needs grinding
Smallest hole≈ sheet thickness≈ 1.5 × thickness
Thin sheet (<3 mm)Excellent, no warpingHeat distortion likely
Thick plate (>25 mm)Not on a 3 kW CO₂ laserGood and economical
Heat-affected zoneNarrowWider
Best forPrecision parts, enclosures, brackets, jaliStructural plate, heavy fabrication

The hidden cost: finishing

A plasma-cut bracket is cheap off the table but often needs dross grinding and hole reaming before it fits. A laser-cut part goes straight to the press brake or welding. Compare cost per finished part, not cost per metre.

What about fiber lasers?

Fiber lasers cut thin sheet faster than CO₂ and reach greater thickness at high power; see fiber vs CO₂ laser cutting.

FAQ

Questions buyers ask us.

Is laser cutting better than plasma cutting?

For sheet and plate up to about 20 mm where accuracy and edge finish matter, laser is better: tighter tolerance, smaller holes, narrower kerf and almost no dross. For thick plate above 20 to 25 mm where tolerance is loose, plasma is usually cheaper and faster.

Is laser cutting more expensive than plasma?

Per metre on thick plate, often yes. Per finished part on thin sheet, often no, because laser parts need little or no grinding and can go straight to bending and welding.

Send the drawing. Get the price.

DXF, DWG, STEP or a PDF sketch. An engineer checks it and replies on WhatsApp or email during working hours.