Home / Guides / Sheet metal gauge chart

Sheet metal gauge chart.

Gauge numbers confuse everyone. This chart converts the gauges used in Indian markets to millimetres and weight, so you can order and draw in mm.

Get a Quote → WhatsApp engineering

Short answer: in the SWG system used in India, 10 gauge = 3.25 mm, 12 = 2.64 mm, 14 = 2.03 mm, 16 = 1.63 mm, 18 = 1.22 mm, 20 = 0.91 mm, 22 = 0.71 mm and 24 = 0.56 mm. A higher gauge number means thinner sheet.

SWG gaugeThickness (mm)MS weight (kg/m²)Aluminium weight (kg/m²)Typical use
84.0631.911.0Base plates, heavy brackets
103.2525.58.8Brackets, chassis parts
122.6420.77.1Mounting and gland plates
142.0315.95.5Panel bodies, guards
161.6312.84.4Panel doors, enclosures
181.229.63.3Covers, cabinets, ducting
200.917.12.5Light covers, trims
220.715.61.9Ducting, flashing
240.564.41.5Roofing, light ducting
260.463.61.2Roofing sheet
MS weight uses 7.85 g/cm³; aluminium 2.70 g/cm³. Stainless steel is about 2% heavier than MS.

How to calculate sheet weight yourself

Weight (kg) = length (m) × width (m) × thickness (mm) × density. For mild steel, multiply by 7.85; for stainless, by 8.0; for aluminium, by 2.7. A 2500 × 1250 mm sheet of 2 mm MS weighs 2.5 × 1.25 × 2 × 7.85 = 49 kg.

That weight is also the basis of the material line on a laser cutting quote; see the price list.

Draw in millimetres

Mills and traders sometimes round gauges (16 SWG sold as 1.5 or 1.6 mm). Put the thickness in mm on your drawing and the material grade, and there is no room for confusion. See how thick each material can be laser cut in the thickness chart.

FAQ

Questions buyers ask us.

How many mm is 16 gauge sheet?

In the SWG system commonly used in India, 16 gauge is 1.63 mm (often bought as 1.6 mm). In the US Manufacturers' Standard gauge for steel, 16 gauge is 1.52 mm. Always confirm the thickness in mm on your drawing.

Is a higher gauge number thicker or thinner?

Thinner. Gauge numbers run backwards: 10 gauge is about 3.25 mm, while 24 gauge is about 0.56 mm.

Which gauge is used for electrical panels?

Panel bodies and doors are usually 16 or 14 SWG (about 1.6 to 2 mm) CRCA, with 12 SWG (about 2.6 mm) or 3 mm for mounting and gland plates.

Send the drawing. Get the price.

DXF, DWG, STEP or a PDF sketch. An engineer checks it and replies on WhatsApp or email during working hours.