Home / Materials / Aluminium laser cutting

Aluminium laser cutting up to 8 mm.

Light, corrosion-resistant parts in 5052, 6061 and 1100 aluminium, cut with nitrogen for clean edges that are ready to bend, anodise or powder coat.

Get a Quote → WhatsApp engineering

Aluminium laser cutting in Ahmedabad at Sigma Laser Tech covers sheet and plate up to 8 mm in alloys such as 5052, 6061 and 1100. It is cut with nitrogen for a clean edge and costs from about ₹177 per metre plus material, with bending and powder coating available.

Good uses for aluminium

  • Electronic and electrical enclosures, heat-sink plates
  • Signboards, letters, façade and ceiling panels
  • Lightweight covers for machines and vehicles
  • Jigs, templates and fixtures

Design tips

  • Keep hole diameters at least equal to the sheet thickness.
  • Use 5052 when the part will be bent; use an inside radius of at least 1–1.5 × thickness.
  • Ask for protective film on cosmetic faces.
Thickness0.8 – 8 mm
Alloys1100, 3003, 5052, 6061, 6063
Assist gasNitrogen
Sheet sizeUp to 3000 × 1500 mm
Ratefrom ₹177/m + material
FinishingBending, powder coating, anodising via partner
FAQ

Questions buyers ask us.

How thick aluminium can you laser cut?

Up to 8 mm aluminium sheet and plate. Aluminium reflects laser light and conducts heat away quickly, so it cuts slower than steel of the same thickness.

Which aluminium alloy is best for laser cutting and bending?

5052 cuts cleanly and bends well, so it is the usual choice for enclosures and brackets. 6061-T6 is stronger but can crack on tight bends, so give it a larger bend radius. 1100 is soft and suited to signage and trims.

What does aluminium laser cutting cost?

From about ₹177 per metre of cut plus material at about ₹330 per kg, before GST. Aluminium weighs about a third of steel, so material cost per part is often lower than it looks.

Send the drawing. Get the price.

DXF, DWG, STEP or a PDF sketch. An engineer checks it and replies on WhatsApp or email during working hours.