Home / Materials / Brass & copper laser cutting

Brass & copper laser cutting.

Non-ferrous parts for electrical, decorative and nameplate work: brass up to 6 mm and copper up to 3 mm, cut slow and clean on our TRUMPF.

Get a Quote → WhatsApp engineering

Brass and copper laser cutting in Ahmedabad at Sigma Laser Tech covers brass up to 6 mm and copper up to 3 mm. Typical parts are nameplates, decorative inlays, electrical terminals and thin busbar parts. Brass cutting starts from about ₹260 per metre plus material.

Where non-ferrous cutting fits

  • Brass nameplates, badges and temple or interior décor
  • Electrical terminals, contacts and earthing parts
  • Decorative inlays for furniture and doors
  • Prototype parts before moving to press tools

Why Ahmedabad's brass and electrical makers send us drawings

Many small brass and electrical units around Ahmedabad need a few hundred parts before investing in a die. Laser cutting needs no tooling, so design changes cost nothing but a new DXF.

Brassup to 6 mm
Copperup to 3 mm
Sheet size3000 × 1500 mm
Rate (brass)from ₹260/m + material
FeasibilityConfirmed per drawing
FAQ

Questions buyers ask us.

Can you laser cut brass and copper?

Yes: brass up to 6 mm and copper up to 3 mm. Both reflect laser energy strongly, so we cut them slower and confirm feasibility after checking the drawing and alloy.

Is laser cutting suitable for copper busbars?

For thin copper strips and small busbar parts up to 3 mm, yes. Thicker busbars are better punched or machined; we will advise when you share the drawing.

What does brass laser cutting cost?

From about ₹260 per metre of cut plus brass material at about ₹732 per kg, before GST. Copper is quoted per job.

Send the drawing. Get the price.

DXF, DWG, STEP or a PDF sketch. An engineer checks it and replies on WhatsApp or email during working hours.