GI sheet laser cutting.
Galvanised, GP and pre-painted sheet cut to drawing for ducting, electrical panels, outdoor enclosures, cable trays and roofing accessories.
GI sheet laser cutting in Ahmedabad at Sigma Laser Tech handles galvanised and GP sheet up to 8 mm and pre-painted sheet up to 4 mm, from about ₹153 per metre plus material. Parts can be bent, spot welded and galvanized after fabrication.
Typical GI parts
- HVAC duct flanges, dampers and collars
- Electrical panel back plates and cable trays
- Outdoor junction boxes and kiosks
- Solar mounting parts and earthing strips
Spot welding GI
Our 20 kVA spot welder joins GI up to 3.25 mm without burning off the coating the way arc welding does, which keeps boxes and panels neat and corrosion resistant.
| GI / GP sheet | up to 8 mm |
| Pre-painted sheet | up to 4 mm |
| Sheet size | 3000 × 1500 mm |
| Rate | from ₹153/m + material |
| Joining | Spot welding up to 3.25 mm |
| After-treatment | Hot-dip galvanizing via partner |
Questions buyers ask us.
Can galvanised (GI) sheet be laser cut?
Yes. We laser cut GI and GP sheet up to 8 mm and pre-painted (colour coated) sheet up to 4 mm. The zinc coating burns back very slightly at the cut edge, which is normal.
Will a laser cut GI edge rust?
The cut edge loses a little zinc, but galvanising protects nearby bare steel for a while. For outdoor parts, a zinc-rich paint touch-up or full hot-dip galvanizing after fabrication gives the best life. We can arrange galvanizing for about ₹21 per kg.
What is the GI laser cutting rate?
From about ₹153 per metre of cut plus GI material at about ₹100 per kg, before GST.
Send the drawing. Get the price.
DXF, DWG, STEP or a PDF sketch. An engineer checks it and replies on WhatsApp or email during working hours.